Intel Core i7 [860] Lynnfield Processor Review  

Posted by Mohammad Talha in , , , ,

Last week Intel's latest addition to its arsenal of desktop processors was released in the form of the Core i7 and Core i5 series' for the LGA1156 socket. These new cores, previously known as Lynnfield (and we will still call it as much throughout our reviews), differ from the previously available Bloomfield processors (only available as Core i7 CPUs for the LGA1366 socket) in a few ways:

  • Dual-channel memory controller- Lynnfield does indeed still have an integrated DDR3 memory controller but here Intel has removed one of the channels from Nehalem to make the new core dual-channel. While this is theoretically a performance drawback, in real-world testing (as you will soon see) the third channel made very little performance difference in most consumer applications. By removing one channel Intel was able to make the CPU package smaller (less pins required), lower the cost of ownership (only two DIMMs needed now) while keeping performance very high.
  • No QPI interface- While Nehalem used the QPI interface to communication with the north bridge of the motherboard, Lynnfield uses a connection called DMI. DMI is much slower than QPI (2 GB/s versus 26 GB/s or so) but in nearly all cases that bandwidth will be more than adequate for the amount of data moving between the processor and chipset even in a worst case scenario. Again, with this change, Intel was able to lower the pin count for Lynnfield in relation to Nehalem.
  • Integrated PCI Express 2.0- A first for a consumer processor, Lynnfield actually takes 16 lanes of PCIe 2.0 and moves them onto the die of the processor itself. That means that the graphics cards (or any other PCIe devices) now communicate directly with the processor itself rather than through a north bridge or chipset controller. The advantage here is for a lower cost chipset though I am betting that performance advantages from this are going to be minimal to non-existent. This is basically another move towards a more highly integrated platform on the Intel CPU.
  • Split HyperThreading integration- HyperThreading is still around on the Lynnfield processors, but it will only be enabled on SOME of the product offerings. While the die size and transistor counts will be exactly the same, Intel will basically just flip off the HyperThreading capability in order to create a market differentiation and pricing segmentation. More details on what CPUs have what on the next page.
  • Larger Turbo Mode differentiations- While Lynnfield was being prepared Intel's engineers found out how to get a little more frequency out of the Nehalem architecture and you'll notice that when you see the larger Turbo Mode improvements on Lynnfield. Essentially, the cores have been fine tuned in a way that will allow them to auto-overclock higher than even the most expensive Core i7 processors available today.

I won't get into all of the architectural or product differences here, but if you are still a bit behind the curve in that regard you should definitely be checking out the previous Lynnfield launch review in which I go into great detail about all things new and old in the processor, motherboard chipset options, pricing and more.

While we already tested the Core i7-870 and Core i5-750 processors, the Core i7-860 finds itself resting directly in the middle of those two parts in terms of clock speeds and Turbo Mode overclocking. (full Story)

world's first 3D camera from Fujifilm  

Posted by Mohammad Talha in , , , ,

Fujifilm Corporation, Japan, one of the world's largest photographic solutions company, today announced the launch of "FinePix REAL 3D System", which it said is its groundbreaking new imaging technology.
Fuji said this is the world's first 3D (three dimensional) digital imaging system that lets users enjoy 3D images with naked eye without the need for wearing special 3D glasses. The revolutionary 3D system consists of FinePix REAL 3D W1, the 3D camera; FinePix REAL 3D V1, an 8 inch viewer on which spectacular 3D images can be displayed; and 3D Print, Fujifilm's high precision production technology that enables users to print 3D images. Tanaka, managing director, Fujifilm India, said, "Fujifilm believes in bringing the latest of its technological innovations to the discerning buyers in India. In accordance with our strategy to become one of the top digital camera brands in India and acquire 15 per cent market share in three years, we shall continue to introduce digital camera models that are world's first in some aspect."
"Fujifilm invented the digital camera and we continue to lead technological innovations in the imaging industry. We wish to assure buyers that when they buy a Fujifilm digital camera, they are getting the best value for money," said A. Rajkumar, country general manager (DSC), Fujifilm India.
To achieve a 3D image, it is necessary to flawlessly layer together two images. So two Fujinon lenses, renowned for their high resolution and exquisite rendering, are installed in the camera. A 3x optical zoom, deemed difficult to achieve in 3D photography because of the precision required to align two lenses, has also been achieved, said a press release.
The engine of the camera synchronizes data passed to it by the two lenses and two CCD sensors, to determine shooting conditions such as focus, brightness and tonality to instantaneously blend this information into a single symmetrical image. (full Story) - Blog Search